There is a “EXIF” feature in the F100; “Record Shooting data”

This can be activated with a software command sent through the serial port available in the ten-pin-port on the camera.

The manual is here, in PDF-format:
www.butkus.org/chinon/nikon/nikon_f100/nikon_f100.htm
Find page 94, there is a MC-31 and MC-33 mentioned, these convert the 10-pin connector to a DSUB 25 or DSUB 9 allowing a PC serial port to be connected to it.

Then all you need is software, one that apparently works is here:
www.holymoose.com/ccstart.html

This is the free one, check the download page.
There is a “free code”.
cocoon-creations.com/COCOON-NiCommSoftTALK-Download.shtml

Being free, also stated here:
www.cocoon-creations.com/COCOON-Shoppingoptions.shtml

 

A new one:
http://petapixel.com/2015/06/11/the-meta35-lets-you-easily-transfer-metadata-from-select-film-cameras

Advertisements